吉林液压升降机油温过高的解决方法很简单，首先要正常分析其产生原因。引起吉林升降机油温过高的原因很多，归纳起来主要有以下两点。Jilin hydraulic lift oil temperature is too high to solve the problem is very simple, first of all to the normal analysis of its causes. The reason for the high temperature of the engine oil in Jilin is too high.

设计不当。包括吉林液压升降机系统中没有卸荷回路；油箱储油量太小，致使油液循环太快，冷却器冷却作用差，且高负荷 长时工作；液压元件选用不当、管路设计不合理及运动元件机械摩擦产生的热量等。Improper design. Including Jilin hydraulic elevator system without unloading circuit; the oil tank is too small, resulting in oil cycle too fast, the cooler cooling effect is poor, and the high load working for long time; the improper selection of hydraulic components, piping design unreasonable and mechanical motion components of friction heat.

使用不当。包括误用粘度太大的油液，引起吉林升降机液压损失过大；液压系统混入空气，磨粒、杂质等被吸附在过滤器的滤芯上；液压油箱内油位过低；液压油冷却循环系统工作环境温度过高等。Improper use. Including the misuse of oil viscosity is too large, causing the Jilin elevator hydraulic loss is too large; the air mixed with the hydraulic system, abrasive and other impurities are adsorbed on the filter cartridge; the hydraulic oil in the oil level is too low; the hydraulic oil cooling system for high temperature working environment.